Custom Cruiser V8-307 5.0L (1987)
FIGURE 1
1.
Remove the No. 3 position insulator assembly and discard. Figure 1. Support the frame as necessary during this operation since the position 2
mount must also be loosened.
FIGURE 2
2.
Install the revised No. 3 mount as illustrated in Figure 2.
3.
Torque all bolts to 103 N-m (76 ft.lbs.).
4.
Repeat steps 1 through 3 for position No.3 mount on the other side of the frame.
PARTS REQUIRED: