Custom Cruiser V8-307 5.0L (1987)
Oil Pan: Service and Repair
EXC. TORONADO
1.
Remove distributor cap and align rotor with No. 1 firing position.
2.
Disconnect ground cable, remove dip stick and drain oil pan.
3.
Remove upper radiator support and fan shroud attaching screws.
4.
Remove flywheel cover and starter.
5.
Disconnect exhaust pipes and crossover pipe on single exhaust models.
6.
Disconnect engine mounts and raise engine.
7.
Remove oil pan bolts and oil pan.
8.
Reverse procedure to install. Torque oil pan bolts to 10 ft. lbs.
