Custom Cruiser V8-307 5.0L (1987)
Illustration
SERVICE PROCEDURE
CAUTION: Take appropriate stops to ensure that vehicle does not move in an unanticipated direction during preparation for service -- be prepared to
apply service brakes any time engine is running.
1.
Raise and support vehicle on hoist.
2.
Remove transmission oil pan bolts, pan and gasket. Drain fluid.
3.
Loosen bolt (80) and turn roller and spring assembly (708) aside so that inside detent lever (704) can be moved freely. Refer to illustration.
4.
Remove retaining pin (703) and loosen hex nut (707). Slide inside detent lever (704) inward on manual shaft (702).
5.
Tip inside detent lever (704) away from control valve assembly (74). Remove/install manual valve link (705).