Custom Cruiser RWD V8-350 5.7L (1992)
Hydraulic Assembly: Service and Repair
1.
Disconnect battery ground cable.
2.
Disconnect and remove air intake duct and resonator, then position upper coolant hose aside.
3.
Disconnect canister purge line at canister and position aside.
4.
Remove modulator valve cover attaching screw and cover.
5.
Disconnect modulator valve electrical connector and ground wire.
6.
Disconnect all hydraulic lines to modulator valve, then plug pipes to prevent loss of fluid and fluid contamination. Note location of pipes for
installation reference.
7.
Revoce three modulator valve to bracket attaching nuts, then the modulator valve from vehicle.
8.
Reverse procedure to install, perform ABS system check as described under DIAGNOSIS AND TESTING PROCEDURE.
