Custom Cruiser RWD V8-350 5.7L (1992)
Blower Motor: Service and Repair
1.
On models equipped with airbags, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING.
2.
On all models, disconnect battery ground cable.
3.
Remove righthand instrument panel sound insulator attaching screws, then pull panel rearward disengaging attaching studs.
4.
Disconnect blower assembly electrical connector.
5.
Remove righthand hinge pillar trim finish panel.
6.
Remove secondary ECM bracket attaching screw, then position secondary ECM and bracket aside.
7.
Support blower motor assembly, then remove blower motor assembly attaching screws.
8.
Remove blower motor assembly.
9.
Reverse procedure to install.
10.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
