Custom Cruiser RWD V8-350 5.7L (1992)
8.
Install upper mount onto strut, aligning marks made during disassembly, and torque nut to 74 ft.lbs. The upper mount and tube air fitting must
be properly positioned with the bottom strut mount, Fig. 33.
9.
Apply silicone lubricant to outer tube.
10.
Install air bladder over outer tube by folding upward over tube and push over tube.
11.
Install and tighten hose clamp over grooved area of air bladder.
12.
Support strut and partially inflate air bladder. Check for leaks with soap solution.
13.
Install strut into vehicle.
