Cutlass L4-138 2.3L VIN A FI HP (1990)
Seat Back: Customer Interest
Seats - Seat Back Rattles, Passenger/Driver's
NUMBER:
92-T-28
CORP.REF.NO: 831034R
DATE:
January 1992
SECTION:
10
SUBJECT:
PASSENGER AND/OR DRIVERS SEAT BACK RATTLE AT LOWER PIVOT PIN - INSTALL WASHERS
MODELS/YEARS:
1988-92 CUTLASS SUPREME
This bulletin applies to 1988-92 Cutlass Supremes with AR9, AM6, AN3 or AQ9 seat options.
Seat back rattle or chucking may be repaired by installing two (2) wavy washers, P/N 17967750, and one flat washer, P/N 17967025 as described and
illustrated below. This repair should be applied to both passenger and drivers seat. Parts are currently available from GMSPO.
1.
Remove front seat back as described in Section 10 of the service manual.
2.
Install one flat and two wavy washers as illustrated.
3.
Reinstall seat back and torque all bolts to specified values as called for in the service manual, Section 10.
WARRANTY INFORMATION:
Labor Operation Number:
T1336
Labor Time:
0.5 hours
Trouble Code:
92