Cutlass L4-138 2.3L VIN A FI HP (1990)
Camshaft Housing Bolt Tightening Sequence
Camshaft Housing, Cover And Gaskets
9. Using J 36660 or equivalent, install bolts and tighten to specification in sequence. Then rotate the bolts the amount of degrees specified in
sequence.
10. Timing chain housing and timing chain. Refer to Timing Cover.
11. Uncover fuel injectors and install new injector "0" ring seals. Lubricate the "0" ring seals with engine oil.
12. Uncover injector openings in cylinder head and install fuel rail onto cylinder head.
