oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Control Assembly, HVAC > < Condenser HVAC|Capacity Specifications|Page 6730
Page 1
background image

Condenser HVAC: Service and Repair

Condenser Mounting

REMOVE OR DISCONNECT

1. Air cleaner assembly including mounting stud and air cleaner duct.
2. Negative battery cable.
3. Discharge A/C system.
4. Coolant reservoir.
5. Air intake resonator mounting nut.
6. Condenser refrigerant line fittings.
7. Upper radiator mounting panel bolts and clamps.
8. Electrical connection from fan(s).
9. Upper radiator mounting panel with cooling fan(s) attached.

10. Tilt radiator rearward and hold.
11. Condenser.

INSTALL OR CONNECT

1. Condenser.
2. Radiator.
3. Upper radiator mounting panel with fan(s) attached.
4. Electrical connection to fan(s).
5. Upper radiator mounting panel bolts and clamps.

^

Tighten bolts to 10 Nm (89 lb. in.).

6. Condenser refrigerant line fitting.

^

Tighten fittings to 27 Nm (20 lb. ft.).

7. Air intake resonator mounting nut.
8. Coolant reservoir. 
9. Negative battery cable.

10. Air cleaner assembly.
11. Evacuate and charge A/C system and check for leaks.

Control Assembly, HVAC > < Condenser HVAC|Capacity Specifications|Page 6730