Cutlass L4-138 2.3L VIN A FI HP (1990)
4.
Inspect the operation of the stoplamps. Stoplamps should operate at a maximum brake pedal travel of 25 mm (i in.) and throughout the remainder
of the pedal travel. If the stoplamps do not operate properly, repeat the switch adjustment procedure one more time. If the switch still fails to
operate properly, refer to the "STOPLAMP SWITCH ADJUSTMENT CHECK" chart.
If stoplamps do operate properly, return to the "STOPLAMP SWITCH REMOVAL AND INSTALLATION" procedure above and continue
with Step 17.
Label Parts and Video Info.
CAMPAIGN IDENTIFICATION LABEL
Each label provides space to print the campaign number, and the five (5) digit dealer code of the dealer performing the campaign. Insert this informatlon
with a typewriter or ballpoint pen. When installing label, clean and dry the surface of the radiator support tie bar and apply the campaign label where it is
