Cutlass L4-138 2.3L VIN A FI HP (1990)
17.
Separate the two banana plugs on the universal deployment harness that were shorted together in step 3. Refer to Figure 6.
Notice:
When the air bag deploys, the rapid gas expansion will create a substantial report. Notify all people in the immediate area of your intention to deploy
the inflator module.
Notice:
When the air bag deploys, the inflator module may jump approximately one foot in height. This is a normal reaction of the inflator module to the
force of the rapid gas expansion inside the air bag.
Caution:
Deployment harness shall remain shorted and not be connected to a power source until the air bag is to be deployed. The inflator module will
immediately deploy the air bag when a power source is connected to it. Connecting the deployment harness to the power source should always be the last
step prior to deployment in the inflator module deployment procedure. Failure to follow procedures in the order listed may result in personal injury.
