Cutlass L4-138 2.3L VIN A FI HP (1990)
Technical Service Bulletin # 91C06
Date: 920202
Recall - Shoulder Belt Guide Loop Reinforcement
SHOULDER BELT GUIDE LOOP CRACKING
Number:
91-C-06
Date:
February 1992
Section:
10
Subject
SHOULDER BELT GUIDE LOOP CRACKING
Models/Years:
1991 CUTLASS SUPREME
CONDITION
General Motors has determined that certain 1991 Oldsmobile Cutlass Supreme model vehicles fail to comply to Federal Motor Vehicle Safety Standard
208, "Occupant Crash Protection". Some of these vehicles have been built with cracked front door shoulder belt guide loops which may not provide front
seat occupants with proper protection in the event of a vehicle crash.
To correct this condition, dealers are to inspect the front door shoulder belt guide loops for possible cracks. If a cracked guide loop is found, both front
door guide loops will have reinforcing plates installed.
VEHICLES INVOLVED
Certain 1991 Oldsmobile Cutlass Supreme model vehicles built within the following VIN breakpoints:
Beginning
Through & Including
MD300001
MD344760
DEALER ACTION
Dealers are to perform this campaign on all vehicles involved at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service, dealers are to ensure
the campaign correction has been made before selling or releasing the vehicle.
Dealers are to contact owners of vehicles recently sold from your new or used vehicle inventory and arrange for the campaign correction to be
performed.
Tools Required
Tools Required:
J 39425-4
Magnetic Inspection/Drilling Fixture
J 39425-1
T-Handle Cutting Bit
PT 7190-12
Powder Dispenser Bulb
Inspection Procedure