oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

All Technical Service Bulletins for Knock Sensor: > < Intake Air Temperature Sensor|Specifications|Page 475
Page 1
background image

Knock Sensor: Customer Interest
MIL ON, DTC 43 (ESC Circuit) Set

NUMBER:

90-T-209

CORP.REF.NO.: 138114R

DATE:

December 1991

SECTION:

6E3

SUBJECT:

SERVICE ENGINE SOON LIGHT MAY SET CODE 43
- REPLACE TERMINAL

MODELS/YEARS:

1990 CUTLASS SUPREME
W/2.3L (VIN D) ENGINE

CONDITION: The "Service Engine Soon" light may come on and set a Code 43, on 1990 Cutlass Supremes with 2.3L (VIN D) engine. The cars may

have decreased performance when the code is set.

CAUSE:

The terminal in the connector to the spark knock sensor may be improperly formed. This condition is limited to early built 1990 models.

CORRECTION:

Remove the connector from the spark knock sensor and inspect the male terminal in the connector. If the terminal appears normal, use
a replacement female terminal to check for proper tension. If the tension is not normal (the female terminal falls out when held
upside-down), or if the terminal appears to be flattened, replace the terminal and seal. P/N 12121037 contains both the terminal and
seal and is currently available from GMSPO.

All Technical Service Bulletins for Knock Sensor: > < Intake Air Temperature Sensor|Specifications|Page 475