oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Electrical Systems - Fuse or Fusible Link Blown|Page 5413 > < Electrical Systems - Fuse or Fusible Link Blown
Page 2
background image

Figure 1

CONDITION:

A fuse or fusible link may intermittently blow causing loss of power to the circuits that are fed by that protection device.

DIAGNOSIS:

If this condition is encountered, attention should be directed to the following areas:

1)

The I/P harness near the I/P support bracket at the right side of the steering column. (See Figure 1)

2)

The I/P harness behind the fuse block at the point at which the harness takes a curve around the fuse block bracket. (See
Figure 1)

CORRECTION:

1)     Repair any damaged wires using the proper procedures as shown in Section 8A- 5 of the Service Manual.

Electrical Systems - Fuse or Fusible Link Blown|Page 5413 > < Electrical Systems - Fuse or Fusible Link Blown