Cutlass L4-138 2.3L VIN A FI HP (1990)
1.
Raise vehicle and support in such a manner that rear suspension is extended in a full downward position.
2.
Inspect both right and left hand auxiliary spring lower brackets to insure they are in contact with spindle rods utilizing a .002" feeler gage.
3.
If a bracket is not in contact, loosen lower bracket to spindle rod bolt a maximum of two revolutions. Let bracket position itself on spindle rod and
re-torque bolt(s) to 46 N-m (36 lbs.ft.).
Caution:
The auxiliary springs are under compression and bolts must not be removed. Doing so may result in personal injury.
4.
Lower vehicle.
WARRANTY INFORMATION:
Labor Operation Number:
T1752
Labor Time:
0.3 hour
Trouble Code:
92
