Cutlass L4-138 2.3L VIN A FI HP (1990)
Fluid Line/Hose: Technical Service Bulletins
A/T - Revised Removal Procedure
NUMBER:
90-T-47
CORP.REF.NO: 977206
DATE:
January 1990
SECTION:
7B
SUBJECT:
SERVICE MANUAL UPDATE - REVISED PROCEDURE FOR 5TM40 REMOVAL - AVOID BENDING THROTTLE BODY COOLANT PIPES
MODELS/YEARS:
1990 CUTLASS CALAIS AND CUTLASS SUPREME
This bulletin supplements the procedure outlined in the appropriate service manuals on the following pages:
Cutlass Calais - Page 7B-14
Cutlass Supreme - Page 7B-20
Prior to disconnecting the transaxle from the engine, the throttle body coolant pipes must be removed. The throttle body coolant pipes must never be bent
to gain clearance. Removal of the throttle body coolant pipes is found In Section 6B of the service manual.