Cutlass L4-138 2.3L VIN A FI HP (1990)
9.
Using same power source, move regulator in opposite direction and repeat step 8.
10.
Remove locking pliers and reinstall regulator assembly into door using 1/4" x 1/2" peel type rivets.
Sedan Rear Doors
WINDOW REGULATOR MOTOR - SEDAN REAR DOORS
REMOVE OR DISCONNECT
1. Regulator.
2. Motor by drilling out rivets holding motor to regulator using a 6.3 mm (1/4 inch) drill bit.
INSTALL OR CONNECT
1. Motor to regulator using a rivet (1/4 inch x .968 inch) part number 9441949 or equivalent.
2. Regulator.