Cutlass V6-189 3.1L VIN T FI (1990)
Install or Connect:
1.
Self-contained replacement cartridge (111).
2.
Strut cartridge closure nut (14) using J 35671 tighten to 110 N-m (82 lbs.ft.).
3.
Install J 35668.
4.
Remove J 38844.
5.
Jounce bumper (7).
6.
Raise strut shaft and remove J 35668.
7.
Strut mount bushing (5).
^
Use a soap solution to lubricate bushing for ease of installation.
^
If necessary, install J 35668 after bushing is partially installed and position strut shaft as required to assist in bushing installation.
8.
Strut shaft nut (4) using No. 50 Torx(R) bit and J 35669 tighten to 98 N-m (72 lbs.ft.).
9.
Strut mount cover and nuts, align scribe marks and tighten to 24 N-m (18 lbs.ft.)
^
Convertible-strut tower brace.
