Cutlass V6-191 3.1L VIN M SFI (1998)
Brake Pedal Assy: All Technical Service Bulletins
Brake Pedal - Clunk/Rattle Noise
File In Section: 05 - Brakes
Bulletin No.: 01-05-22-001
Date: January, 2001
TECHNICAL
Subject:
Clunk, Rattle Noise from Front of Vehicle
(Replace Brake Pedal Assembly)
Models:
1997-2001 Chevrolet Malibu
1997-1999 Oldsmobile Cutlass
1999-2001 Oldsmobile Alero
1999-2001 Pontiac Grand Am
with Automatic Transmission
Built Prior to the VIN Breakpoints shown.
Condition
Some customers may comment on a rattle or clunk type noise coming from the underbody or front suspension.
Cause
The brake pedal pivot pin bushing may cause this condition.
Correction
Diagnose condition prior to replacing the brake pedal assembly by putting light side pressure on the brake pedal with your foot and applying the brakes.
If the noise is no longer present, replace the existing brake pedal assembly with a new assembly, P/N 22672398. If the noise is still present, re-evaluate
the condition using diagnostic information in the appropriate Service Manual. Follow the service procedure listed below to replace the brake pedal
assembly.
1.
Remove left sound insulator panel.
