Cutlass V6-191 3.1L VIN M SFI (1998)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Modulator Bracket Replacement
REMOVAL PROCEDURE
CAUTION: To help avoid personal injury, due to a retained load on the brake modulator, the Gear Tension Relief function of the scan
tool must be performed prior to removal of the ABS brake modulator/master cylinder assembly.
1. Remove the Hydraulic modulator assembly.
2. Remove the bracket mounting bolts.
3. Remove the bracket from subframe.
INSTALLATION PROCEDURE
1. Install the bracket onto subframe.
Install the mounting bolts.
-
Tighten the bracket mounting bolts to 25 Nm (18 ft. lbs.)
NOTICE:Refer to Fastener Notice in Service Precautions.
2. Install the Hydraulic modulator assembly.