Cutlass V6-191 3.1L VIN M SFI (1998)
Brake Switch (Cruise Control): Service and Repair
Cruise Control Brake Switch Adjustment
Incorrect adjustment could cause the cruise control system to not work properly.
REMOVE OR DISCONNECT
1. Left side A-pillar defogger duct from underneath I/P.
ADJUST
1. Twist switch counterclockwise to release from retamer.
2. With switch connector oriented toward the one o'clock position, slide the switch into retainer until the switch plunger is fully depressed into the
switch barrel.
3. Twist switch clockwise until travel stop has been reached.
NOTE: The switch connector will face the three o'clock position when locked.
INSTALL OR CONNECT
1. Left side A-pillar defogger duct from underneath I/P.