Cutlass V6-191 3.1L VIN M SFI (1998)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable. Refer to Battery Disconnect Caution in Service Precautions.
2. Remove the oil level indicator tube nut.
3. Remove the oil level indicator tube from the engine.
INSTALLATION PROCEDURE
1. Install the oil level indicator tube to the engine. Ensure that the tube assembly is fully seated in the engine.
2. Install the oil level indicator tube nut.
^
Tighten the nut to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Connect the negative battery cable.
