Cutlass V6-191 3.1L VIN M SFI (1998)
Front Crankshaft Seal: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
3. Remove the right front tire and wheel assembly. Refer to Wheel Removal in Tires and Wheels.
4. Remove the right splash shield. Refer to Splash Shield Replacement in Bumpers.
5. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
IMPORTANT: Be careful not to damage the crankshaft.
6. Remove the crankshaft key from the keyway.
7. Pry out the oil seal. Use a tool such as a large screwdriver.
8. Inspect the following items for scratches:
^
Front cover
^
Crankshaft
INSTALLATION PROCEDURE
^
Tools Required
-
J 35468 Crankshaft Seal Installer and Centering Tool