oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Compressor Pulley > < Clutch Clearance|Page 8623
Page 1
background image

Compressor Control Valve Assembly: Service and Repair

V-5 Compressor

Tools Required:
^

J 39500 R-134a Refrigerant Recovery, Recycling, and Recharging (ACR4) System

^

J 5403 Internal Snap Ring Plier

Remove or Disconnect

1. Negative battery cable.
2. Recover refrigerant. 
3. Raise vehicle. 
4. Control valve retaining ring using internal snap ring pliers or J 5403.
5. Control Valve.

Install or Connect

1. Control Valve.
2. Control valve retaining ring using internal snap ring pliers or J 5403.
3. Lower vehicle.
4. Evacuate and recharge refrigerant system. 
5. Negative battery cable.

Compressor Pulley > < Clutch Clearance|Page 8623