Cutlass V6-191 3.1L VIN M SFI (1998)
Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming
Disabling the SIR System
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the LOCK position.
3. Remove the key from the ignition switch.
IMPORTANT: With the AIR BAG Fuse removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates. This is a
normal operation and does not indicate an SIR system malfunction.
4. Remove the AIR BAG Fuse from the LH I/P Wiring Ha mess Junction Block.
5. Remove the Connector Position Assurance (CPA) (2) from the driver yellow 2-way connector (1) located above the LH I/P Wiring Harness
Junction Block.
6. Disconnect the driver yellow 2-way connector (1) located above the LH I/P Wiring Harness Junction Block.
Description
7. Remove the Connector Position Assurance (CPA) (2) from the passenger yellow 2-way connector (3) located above the RH I/P Wiring Harness
Junction Block.
Description
8. Disconnect the passenger yellow 2-way connector (3) located above the RH I/P Wiring Harness Junction Block.
Enabling the SIR System
1. Remove the key from the ignition switch.
2. Connect the passenger yellow 2-way connector (3) located above the RH I/P Wiring Harness Junction Block.
