Cutlass V6-191 3.1L VIN M SFI (1998)
-
Right rear
-
Left rear
-
Right front
-
Left front
9.1. Attach the bleeder hose to the bleeder valve. Submerge the opposite hose end in a clean container partially filled with brake fluid.
9.2. Open the bleeder valve.
9.3. Slowly depress the brake pedal.
9.4. Close the valve and slowly release the brake pedal.
9.5. Wait 5 seconds.
9.6. Repeat the previous five steps until the brake pedal feels firm at half travel and no air bubbles are observed in the bleeder hose.
Tap lightly on the caliper or the braking plate in order to assist in freeing entrapped air.
10. Lower the vehicle.
11. Remove the fluid reservoir cover.
12. Inspect the fluid level in the reservoir. Fill the reservoir to the correct level, if necessary.
