Cutlass V6-191 3.1L VIN M SFI (1998)
Drive Belt: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 39914 Drive Belt Tension Wrench
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Rotate the belt tensioner. Use the J 39914.
3. Remove the drive belt from the generator pulley.
4. Support the engine by the oil pan.
5. Remove the engine mount assembly from the engine mount bracket support. Refer to Engine Mount Replacement.
6. Remove the auxiliary bracket.
7. Lower the engine in order to remove the drive belt.
8. Remove the drive belt.
INSTALLATION PROCEDURE
^
Tools Required
-
J 39914 Drive Belt Tension Wrench