Cutlass V6-191 3.1L VIN M SFI (1998)
Hose/Line HVAC: Service and Repair
Evaporator Tube (Evaporator to Condenser)
A/C System Plumbing
Tool Required:
J 39500 R-134a Refrigerant Recovery, Recycling, and Recharging (ACR4) System
Remove or Disconnect
1. Recover refrigerant.
2. Block fitting from the evaporator and discard the O-ring seals.
3. Raise vehicle.
4. Connection at the condenser and discard the O-ring seal.
5. Right front tire/wheel.
6. Splash shield from fascia.
7. Brake tube retainer from vehicle and position aside.
8. Evaporator tube from retaining clip on the body side rail.
9. Evaporator tube.
Install or Connect
1. Evaporator tube.
2. Evaporator tube to retaining clip on the body side rail.
3. Brake tube retainer to vehicle.
4. Splash shield.
5. Right front tire/wheel.
6. Connection at the condenser and O-ring seal. Tighten
^
Bolt to 25 N.m (18 lb ft).
7. Lower vehicle.
