Cutlass V6-191 3.1L VIN M SFI (1998)
INSTALL OR CONNECT
1. Gear inlet pipe/hose to vehicle.
2. Gear inlet pipe/hose to the steering gear.
Tighten
^
Pipe/hose assembly to 27 Nm (20 ft. lbs.).
3. Line retainer (if applicable).
4. Lower vehicle.
5. Gear inlet hose/pipe to pipe (going to pump).
Tighten
^
Pipe to 27 Nm (20 ft. lbs.).
Important: Bleed air from system.
^
Inspect for leaks.
