Cutlass V6-191 3.1L VIN M SFI (1998)
5. Remove the accelerator control and cruise control cables from the accelerator control cable bracket.
6. Remove the accelerator control cable bracket.
7. Remove the throttle body coolant bypass hoses.
8. Remove the heater pipe nut at the throttle body.
9. Remove the nuts and bolts holding the throttle body to the intake manifold.
10. Remove the throttle body assembly.
Installation Procedure
Notice: Do Not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket
surfaces and throttle body assembly may result.