Cutlass V6-191 3.1L VIN M SFI (1998)
5. Remove the following strut assembly components:
-
The nut (2)
-
The washer .(1)
-
The strut upper mount (6)
-
The strut coil spring (5)
-
The strut dust shield (3)
-
The strut (4)
ASSEMBLY PROCEDURE
NOTICE: Care should be taken to avoid scratching or cracking the spring coating when handling the front suspension coil spring. Damage can cause
premature failure.
1. Mount strut (4) into J 34013 using bottom locking pin only. Extend the dampener shaft.
