Cutlass V6-191 3.1L VIN M SFI (1998)
may cause damage to the seals.
1.
Lubricate the inside surface of both new cooler line seals (49) with automatic transmission fluid DEXRON(R) III.
2.
Place a new cooler line seal (49) into the case bore.
3.
Install the cooler line seal installer tool J 41239-1 on the transmission case (51) at the cooler line bracket bolt hole.
4.
Press the new cooler line seal (49) in by tightening the seal pressing bolt on the cooler line seal installer tool J 41239-1 until the seal bottoms out
in the case bore.
5.
Repeat steps 2 through 4 for the second cooler line seal (49).