Cutlass V6-191 3.1L VIN M SFI (1998)
Power Window Switch: Service and Repair
Power Accessory Switch Panel Replacement
POWER ACCESSORY SWITCH PANEL REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the power accessory window switch panel (3) from the door (5) by prying the front of the switch with a flat bladed tool.
3. Disconnect the electrical connectors (4) from the switch (3).
INSTALLATION PROCEDURE
1. Connect the electrical connector (4) to the switch (3).
2. Install the switch (3) to the door (5).
3. Ensure the unit is retained.
4. Connect the negative battery cable.
