Cutlass V6-191 3.1L VIN M SFI (1998)
Power Window Switch: Service and Repair
Door Handle Bezel Replacement
DOOR HANDLE BEZEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the door handle bezel screw (1) from the handle bezel(2).
2. Remove the power door lock switch, if equipped.
INSTALLATION PROCEDURE
1. Install the power door lock switch, if equipped.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the door handle bezel screw (1) to the door handle bezel (2).
Tighten
Tighten the door handle bezel screw to 2 Nm (20 lb in).
