Cutlass V6-262 4.3L DSL VIN V FI (1983)
Throttle Cable/Linkage: Adjustments
Throttle Rod Adjust
Fig. 29 Throttle linkage. V8 engine
1. If equipped with Cruise Control, remove clip from Cruise Control rod, then the rod from bellcrank.
2. Remove throttle valve cable from bellcrank, Fig. 29.
3. Loosen the throttle rod locknut and shorten the rod several turns.
4. Rotate the bellcrank to the full throttle stop, then lengthen the throttle rod until the injection pump lever contacts the injection pump full throttle
stop. Release the bellcrank.
5. Tighten the throttle rod locknut.
6. Connect the throttle valve cable and Cruise Control rod, if equipped, to bellcrank.
