Cutlass V8-307 5.0L VIN 9 4-bbl HP (1984)
5.
Acme 88; Rogers 088
6.
Martin-Senour 6383
II.
NYLON - will be supplied in prime. Use the same procedure to refinish as on sheet metal
parts.
III.
ACRYLONNITRILE-BUTADIENE-STYRENE (ABS) - No prime required, paint with acrylic
lacquer.
IV.
POLYESTER PARTS (UP, PBTP) - will be supplied in prime and/or black paint. Use the
same procedure to refinish or repair as on sheet metal parts.
V.
POLYPROPYLENE - Interior parts.
A.
Wash surface thoroughly with enamel reducer (do not use wax and grease removers)
B.
Apply primer immediately and allow to dry completely before color coating.
C.
Color coat with lacquer or enamel reduced and applied according to the manufacturers recommendation.
D.
Materials
Cleaning Solvent - DuPont 3812S Enamel Reducer Ditzler DTE-101 or DTE-102 "Bobcat" enamel reducer Primer - DuPont 3293 GM
1052364
