Cutlass Ciera L4-2.2L VIN 4 (1995)
Engine Mount: Service and Repair
Fig. 1 Engine Mounts
1. Install engine support tool Nos. J-28467-A and J-36462, or equivalents, then remove engine mount strut.
2. Raise and support vehicle, then remove right wheel and tire assembly.
3. Remove right engine splash shield.
4. Remove engine mount nuts from frame.
5. Lower vehicle.
6. Using tool No. J-28467-A, or equivalent, raise engine off mount.
7. Remove nut attaching engine bracket to mount, then remove mount assembly, Fig. 1.
8. Reverse procedure to install.
