Cutlass Ciera L4-2.2L VIN 4 (1995)
Tighten
Solenoid valve mounting bolts to 30 Nm (22 lb. ft.).
2. Vacuum hoses.
3. Electrical connector.
4. Position MAP sensor seal (lubricated with a thin film of clean engine oil) into manifold assembly halfway, insert MAP sensor nipple into seal, seat
sensor fully into seal and onto mounting surface.
5. MAP sensor screws.
Tighten
MAP sensor screws to 3 Nm (27 lb. in.). DO NOT OVER TORQUE!
6. Negative battery cable.