Cutlass Ciera L4-2.2L VIN 4 (1995)
5. Upper transaxle bracket bolt.
6. Transaxle bracket nut.
7. Raise vehicle and suitably support.
8. Left front tire and wheel.
9. Left lower engine splash shield.
10. Pinch bolt from intermediate shaft.
11. Transaxle bracket to mount nuts.
12. Frame to transaxle mount nuts.
13. Left side bolt and nut from ball joint.
14. Install jackstands.
15. Right side frame bolts.
16. Left side frame bolts.
17. Lower frame.
18. Transaxle mount.
19. Transaxle oil cooler lines to transaxle.
20. Transaxle bracket nut, bolts and bracket.
INSTALL OR CONNECT
1. Transaxle bracket, nuts and bolts.
TIGHTEN
^
Rear bolt/screw to 87 Nm (64 lb. ft.).
^
Remaining bolts/screws to 52 Nm (39 lb. ft.).
^
Nut to 32 Nm (24 lb. ft.).
2. Transaxle oil cooler lines to transaxle.
3. Transaxle mount and nuts.
4. Raise frame.
5. New left side frame bolts.
6. New right side frame bolts.
7. Remove jackstands.
8. Left side bolt and nut to ball joint.
9. Frame to transaxle mount nuts.
10. Transaxle bracket to mount nuts.
11. Pinch bolt to intermediate shaft.
12. Left lower engine splash shield.
13. Left front tire and wheel.
14. Lower vehicle.
15. Upper transaxle bracket nut.
16. Upper transaxle bracket bolt.
17. Torque strut bolt.
18. Strut bracket nut.
19. Remove J 28467-A.
20. Air cleaner and duct.
