Cutlass Ciera L4-2.2L VIN 4 (1995)
Cause
(Figures 1 and 2)
This condition may be due to the control valve body spacer plate. 5SWC models built before August 24, 1994 (Julian Date 236) had an undersized
orifice. The spacer plate can be identified by the part number stamped on the part.
Correction
To repair this condition, the spacer plate must be replaced. Follow the steps listed under "Service Information."
Service Information (Figures 1 and 2)
1.
Road test the vehicle. Verify that the vehicle has a delayed 2-3 upshift as listed under "Condition."
2.
Verify the following transaxle identification information:
^
the model is a 5SWC
^
the Julian Date is less than 236 and the Calendar Year is 4.
3.
Replace the original spacer plate (P/N 24201520) with the revised spacer plate (P/N 24203356). It will also be necessary to replace the valve body
cover gasket and the spacer plate gaskets.
Parts Information
Parts are currently available from GMSPO.
Warranty Information