Cutlass Ciera V6-3100 3.1L VIN M SFI (1996)
ABS Brake Modulator/Master Cylinder Assembly Components
Disassemble
1. Remove gear cover.
2. Four Torx head screws attaching ABS brake motor pack.
Important
^
Use care when handling the motor pack to ensure the motor pack connectors are not damaged, or accidental intrusion of brake fluid into the
motor pack does not occur. This may result in a premature failure of the motor pack.
^
Take care in handling the motor packs. If dropped or damaged during handling, the motor packs must be replaced.
3. Remove ABS motor pack.
Important
^
If disassembly of the brake modulator-master cylinder assembly was due to an ABS hydraulic functional test that did not pass, the Automated
ABS brake motor pack Diagnosis Test described in this section should be performed at this time to isolate the ABS brake motor pack or brake
modulator.
^
No repair of the motor pack is authorized. Replace as an assembly.
