Cutlass Ciera V6-3100 3.1L VIN M SFI (1996)
Fig. 5 Exhaust Manifold Removal. Right
RIGHT
1. Remove battery ground cable, then air cleaner assembly.
2. Raise and support vehicle, then remove exhaust pipe from manifold.
3. Lower vehicle, then remove breather and mass air flow sensor.
4. Remove heat shield, then crossover at manifold.
5. Remove throttle and throttle valve cables from throttle body, then throttle and throttle valve cable bracket at upper intake manifold.
6. Remove oxygen sensor, then exhaust manifold attaching bolts.
7. Remove exhaust manifold, Fig. 5.
8. Reverse procedure to install. Tighten to specifications.