Cutlass Ciera V6-3100 3.1L VIN M SFI (1996)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Strut Replace
Fig. 2 Strut Assembly Replacement
1. Remove strut top attaching nuts, then raise and support vehicle.
2. Place jack stands under suspension support, the lower vehicle slightly so weight of vehicle rests on jack stands.
3. Remove wheel assemblies, then install drive axle seal protectors.
4. Disconnect front wheel sensor, if equipped w/anti-lock brakes.
5. Remove brake line bracket from strut assembly, then strut to steering knuckle attaching bolts.
6. Remove strut from vehicle, Fig. 2.
7. Reverse procedure to install. Tighten to specifications.
Strut Service