Cutlass Ciera V6-3300 3.3L (1990)
NOTE: In the next step, bearing sleeve (4) must be installed between the secondary shoe and lining (12) and the actuator lever (7).
6. Install bearing sleeve (4), actuator lever (7) and lever return spring (8).
7. Install hold-down pins (5) and hold-down springs (3).
8. Install actuator link (6) on anchor pin (32).
9. Install actuator link (6) into actuator lever (7) while holding up on lever.
10. Install shoe return springs (1 and 2) using J 8057 pliers or equivalent.
11. Adjust Brakes. Refer to Brake Shoe/Adjustments.See: Adjustments
