Cutlass Ciera V6-3300 3.3L (1990)
2.
Position sensor with pedestal attached on Tool J-37089.
3.
Position tool on crankshaft.
4.
Install bolts to hold pedestal to block face, torque to 25-35 N-m (18-26 lb. ft.).
5.
Torque pedestal pinch bolt to 3-5 N-m (26-44 lbs. in.).
6.
Remove Tool J-37089.
7.
Install foreign object deflector.
8.
Place Tool J-37089 on harmonic balancer and turn. If any vane of the harmonic balancer touches the tool, replace the balancer assembly.
9.
Install balancer on crankshaft.
10.
Apply thread sealer GM # 1052080 or equivalent to threads of crankshaft balancer bolt. Torque bolt to 140 N-m + 56 degrees (104 lb. ft. + 56
degrees).
11.
Install inner fender shield.
12.
Install tire and wheel assembly. Torque lug nuts to 140 N-m (104 lb. ft.).
13.
Lower vehicle.
14.
Install serpentine belt.