Cutlass Ciera V6-3300 3.3L (1990)
Band Apply Servo: Service and Repair
Hydra-Matic 440-T4 (4T60 & 4T60E)
Reverse Servo
Fig. 11 Reverse & Forward Servo. 4T60E
4T60E
1.
Remove air cleaner assembly and exhaust crossover pipe.
2.
Raise drivers side of car so it is higher than differential side. This will ensure that the reverse band will be in the proper location.
3.
Depress servo cover, then remove snap ring, servo cover, servo piston, sealing ring, apply pin and servo spring, Fig. 11.
4.
Reverse procedure to install.
1-2 & Reverse Servo
