Cutlass Ciera V6-3300 3.3L (1990)
Window Frame: All Technical Service Bulletins
Door Frame, Front - Windnoise
SUBJECT
WINDNOISE AT REAR OF FRONT DOOR FRAME
(SEAL GLASS RUN CHANNEL TO DOOR FRAME)
MODELS/YEARS
1990 CUTLASS CIERA
NUMBER:
90-T-60
CORP.REF.NO: 031001
DATE:
March 1990
SECTION:
10-5
Figure 1
Some early 1990 Cutlass Ciera Models may exhibit a windnoise condition at the rear upper corner of the front door frame. The condition may be due to
the glass run channel not being sealed to the door frame at the upper seat belt attaching point, and may be repaired by using the following procedure:
1.
Lower door glass to full down position.
2.
Using a heat gun, lightly heat the outer portion of the seat belt upper attachment cover. Heat will reduce the possibility of retainer pin breakage
during removal.
3.
Remove the outer cover by pulling forward (See Figure 1).