Cutlass Ciera Cruiser L4-151 2.5L (1985)
3.
Remove the red no. 2 circuit wire terminal from cavity D or E of the connector. Inspect the terminal for damage in the area shown in Figure 1.
4.
If terminal is not damaged, insert terminal back into the connector and reconnect the relay.
5.
If terminal is damaged in the area shown, remove and replace with a new terminal, making sure to crimp and solder for a good connection.
6.
Insert terminal back into connector and reconnect the relay.
7.
Connect the negative battery cable.
NOTICE:
If the cooling fan is still inoperative after this procedure is performed, follow the service manual diagnostics for analysis of total cooling fan
system.
The breakpoint VINs for vehicles already reworked at the assembly plants are as follows:
Assembly Plant
Plant Code
VIN Breakpoint
Framingham
G
FG396094
Doraville
D
FD456161
Leeds
K
FK345450
Oshawa
9
F9320731
