Cutlass Ciera Cruiser L4-151 2.5L (1985)
Level Control Solenoid Valve: Testing and Inspection
System Exhaust Continuously
1984-85 Cutlass Ciera & 1985 98
1.
Disconnect height sensor electrical connector. If system continues to exhaust, proceed to step 2. If system no longer exhausts, proceed to step 3.
2.
Check for a short to ground in white wire between compressor and height sensor and repair as necessary. If wire is satisfactory, replace vent
solenoid valve.
3.
Check height sensor adjustment. If sensor is properly adjusted, but problem persists, replace height sensor.
