Cutlass Ciera Cruiser V6-231 3.8L (1985)
Steering Column: Service and Repair
Ignition Lock Cylinder
1.
Remove steering wheel as outlined under ``Steering Wheel, Replace'' procedure.
2.
Remove turn signal switch as outlined under ``Turn Signal Switch, Replace'' procedure.
3.
Remove buzzer switch and spring clip.
4.
Turn lock cylinder to ``Run'' position, then remove lock cylinder retaining screw and the lock cylinder.
5.
To install, rotate lock cylinder to the stop while holding housing. Align cylinder key with keyway in housing, then push lock cylinder into housing
until fully seated.
6.
Install lock cylinder retaining screw, then the buzzer switch, turn signal switch and steering wheel.
